)
)Wire and Pipe Pendants
Reductions for standard (surface mounted) light fittings
(4 reductions, 4 nuts)
Instructions for mounting reductions:
1) fix the reductions to the light fitting
2) screw the cable grippers into the reductions
Wire pendants for DIRECT/INDIRECT luminaires (ID)
Attention:A reduction must be used for surface mounted light fittings!
ZLY = “Y-shaped” quality wire pendant
Marking:
ZLY/1 – “Y-shaped” quality wire pendant 1m (Lmax = 1m)
ZLY/2 – “Y-shaped” quality wire pendant 2m (Lmax = 2m)
ZL4 = 4-point quality wire pendant. Suitable for all light fittings. Recommended especially for separately suspended direct/indirect (ID) and low light fittings
Marking:
ZL4/1 – 4-point wire pendant: 1m (Lmax = 1m)
ZL4/2 – 4-point wire pendant: 2m (Lmax = 2m)
ZL2 = 2-point simple and cheap wire pendant. Cheap but more difficult version of wire pendant .
Marking:
ZL2/1 – 2-point wire pendant: 1m (Lmax = 1m)
ZL2/2 – 2-point wire pendant: 2m (Lmax = 2m)
Pipe pendants:
60 Pipe pendants (1x pendant l=0,6m, ø=13mm)
90 Pipe pendants (1x pendant l=0,9m, ø=13mm)
